Nowadays, there can be observed high-level emergence of Linksys Velop mesh Wi-Fi system. Their popularity is increasing day by day. However, this networking device offers you a top-notch Wi-Fi range, enabling you to enjoy the fastest internet connection all over your premises, but still with the passage of time, you have to face issues with your Velop. One of those issues is Linksys Velop red light blinking.
If you see a continuous flash of red from your Linksys Velop and want to resolve all your issues concerned; you can be one step ahead by preferring the Linksys Velop mesh Wi-Fi system. So, let’s move ahead and go through this guide & follow the instructions given to resolve Linksys Velop blinking red light issue.
What Is Solid And Blinking Red Light On Linksys Velop?
A solid red light on your Linksys Velop means you have an internet connection. On the other hand, Linksys Velop blinking red light indicates that your Wi-Fi router is not properly connected to the modem and the nodes are not in the range.
How To Troubleshoot Linksys Velop Red Light Issue?
Simply put, there is a range of tested solutions available to resolve the red light issue that you are facing with your Linksys Velop. One thing that you have to do is to follow the given tips carefully. Let’s have an overview of the key fixes listed in this section and sort out the Linksys Velop red light issue forever.
1. Check the physical condition of the cables
First of all, it requires you to verify that the Ethernet cable or other wires that you are using to connect your smart device to the Linksys Velop mesh Wi-Fi are not burnt or damaged at all. For this, inspect exposed sections of cables for physical damage such as cuts, tears, or frayed ends. So, by performing regular inspections you can maintain the reliability and safety of your cables.
2. Restart or reboot
In the next tip, you can restart or reboot your mesh Wi-Fi system. For this, you have to follow a few key steps that are-
- Locate the Reset Button:
Find the reset button on the bottom or back of the Velop node.
- Press and Hold the Reset Button:
Press and hold the button for at least 20 seconds. The light on the node will turn red, fade, and then flash bright red again.
- Release the Button:
Wait until the light goes out and then turns bright red.
- Reconfigure Your Velop System:
After the hard reboot, you’ll need to go through the setup process again. Customized settings such as Wi-Fi name, password, and security type will be erased.
3. Power cycling of modem
You also have an option to power cycle your modem. The process of power cycling-
- Locate the power cable connected to your modem.
- Unplug the modem from the power outlet.
- Wait at least 15 Seconds.
- Reconnect the modem to the power outlet.
- Wait for the modem to fully boot up.
4. Check for firmware updates
To solve the Linksys Velop red light issue, it will be best for you to cross-check if there is any new firmware version available for your Mesh Wi-Fi system. You can verify them via following the steps given below-
- Open a web browser on a computer connected to the Velop Wi-Fi network.
- Enter the default IP address of your Linksys Velop -usually 192.168.1.1 or 192.168.0.1.
- Log in using the default login details.
- Look for the firmware version on the upper-right side of the screen.
- Compare it with the latest version available on the Linksys support site.
- If an update is needed, download the firmware file and follow the on-screen instructions for upgrading.
5. Linksys Velop Factory Reset
When none of these methods enable you to fix the issue, you can factory reset the Linksys Velop.
- To reset the Velop, power on the node.
- Locate the RESET button.
- Now, press the button and hold it for 15 seconds.
- In the next step, when the light on the node turns red, release the button.
- Reconfigure your Velop once the reset is successful.
Bottom-line
Hopefully, after going through the information given above in the blog post, you will be able to get the literal meaning of the solid Linksys Velop red light and blinking red light on this mesh Wi-Fi system.
In addition to this, you can also be familiar with key reasons for this issue and troubleshooting tips to resolve it. This way, you can surely keep your device optimized at all times and also get extreme satisfaction.
