In this modern era, Linksys Velop is a leading brand in the networking market. This mesh system is renowned for its advanced features, blazing fast speeds, and more. Additionally, connecting Linksys Velop to existing router is also convenient using different methods. Likewise, if you want to explore further about linking your mesh system to the existing router, then read this guide!
How to connect linksys velop to the existing networking device?
Further, you can use the web address and the Linksys application to link your Velop mesh system to the existing router. All you need is a stable network, valid admin details, ethernet cables, a computer/smartphone, etc. After that, go ahead with the steps mentioned in this section for connecting Linksys Velop to existing router, have a closer look:
Configuring Velop to the existing gateway using the Web Portal
- To start with, place the existing router and Velop mesh router closer.
- Next to this, turn on the primary mesh unit and child nodes.
- Further, connect the computer to the Velop router’s network.
- Afterward, launch the preferred web browser and enter the linksyssmartwifi.com web address in the URL bar.
- You can also key in the 192.168.1.1 IP address instead of the web address.
- Here, a login window prompts you; write in the accurate admin credentials on this window.
- If you are a new user, then tap on the mobile phone image to evade blockage.
- Next, click on the Reset Password link and generate a new security key.
- You are now asked to key in the Recovery Key, which is mentioned at the router’s bottom.
- Moving in the same vein, create a new password and then click on Submit.
Setting up the existing router to the Velop mesh network
- After that, you will visit the setup screen of the Velop mesh system.
- Hereon, tap on the CA link at the bottom of the screen.
- Now, a new screen will appear to you.
- Further, click on the Connectivity>CA Router Setup>Set a WiFi SSID & Password (enter strong network name and password)>Setup Node.
- At this time, you may temporarily lose the internet connection.
- Afterward, check that the LED on the Velop router turns to solid Blue.
- Hereon, click the OK>Apply, and you will see the “Your Master Node is now Configured” notification after connecting Linksys Velop to existing router.
- Finally, the procedure ends here for successfully linking Velop to your existing router.
Connecting Linksys Velop to existing router via the app
- Initially, connect your modem to the Velop mesh router.
- After that, confirm that you are using an updated version of the Linksys application.
- Now, disconnect the existing router from the local network.
- Next, use an ethernet cable for connecting Linksys Velop to existing router.
- Also, place the child nodes closer to the Velop primary node.
- Afterward, start the app and access the admin account using valid user details.
Configuring the Velop
- Here, click on the “Setup New wifi System” alternative and select Velop on the screen.
- Now, a new screen prompts you to create the wifi SSID and password.
- After having new network details, click on Save/Apply.
- Again, go back to the app dashboard and choose your Velop model.
- Here, the app will scan for the available nodes and the network.
- Now, click on the “Add Child Node” option and follow the on-screen guidelines to connect them to the Velop network.
- Further, you can also configure the additional settings, like Guest Mode, Parental Controls, etc., by following the instructions.
- Lastly, you learn here how to connect Linksys Velop to the existing gateway easily.
Wrapping Up
On the whole, this brief guide will make you aware of connecting Linksys Velop to existing router in detail. You find two methods to carry out such a procedure by following the elaborative steps. Additionally, each process is different, so choose wisely that you seem easy. Hope you find this guide beneficial to complete the Velop configuration process!
